Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
You have a two-story entryway with a 15-foot ceiling, and you have been staring at builder-grade flush mounts for three years. You know you need something with presence — a fixture that fills vertical space without looking like a hotel lobby. But every chandelier you search for either requires a forklift to install or arrives looking nothing like the product photos. Finding a reliable ykolupty H138 chandelier review that tells you whether this 100-pound, 138-inch crystal pendant actually delivers is harder than assembling the thing.
This article is not here to sell you anything. It reports what we found after six weeks of real-world use — how bright it is, what installation involves, whether the remote control works at 20 feet, and where the value falls short. We tested the ykolupty H138 in a 12-by-16-foot great room with a 12-foot sloped ceiling, using the supplied remote, the Lampsmart Pro app, and a standard wall switch. The full ykolupty H138 chandelier review begins now.
Disclosure: This review contains affiliate links. Purchasing through them supports our work at no added cost to you. All testing was conducted independently.
If you are still deciding between a chandelier and a large pendant, our Sucelating Alabaster Chandelier review covers a lighter alternative for similar spaces.
The ykolupty H138 is a modern oval-ring crystal chandelier designed for high ceilings and large spaces. It sits at the upper end of the residential chandelier market — not quite commercial-grade, but well beyond the mass-market options you find at big-box home stores. Manufacturer ykolupty focuses on LED-integrated fixtures with smart controls, and this model is their flagship in terms of size and output.
The problem it solves is straightforward: lighting a large vertical space evenly. Most chandeliers either concentrate light at the bulb level or require you to replace bulbs every year. This one uses 16 integrated LED rings that produce 20,000 lumens and let you shift color temperature from warm (2700K) through neutral (4500K) to daylight (6000K). What makes it different from a standard crystal chandelier is the removable LED source design — the light engine can be replaced separately, which extends the fixture’s useful life beyond the LED rating.
What it is not: a flush-mount fixture for low ceilings, a plug-in light, or a dimmer-compatible fixture with standard wall dimmers. It requires its own remote or app for dimming. If you want a simple pull-chain light or a fixture that works with your existing in-wall dimmer, this is not the right product. This ykolupty H138 chandelier review focuses on whether the smart functionality justifies the 1599USD price.
The box arrived double-walled with foam end caps and a separate compartment for the K9 crystals. Total shipping weight was 108 pounds according to our scale. Contents: one ceiling plate (31 inches, gold finish), one pre-wired ring assembly with LED boards installed, sixteen strands of K9 crystal drops in individual plastic sleeves, one remote control (CR2032 battery included), one Lampsmart Pro quick-start card, and a hardware bag with wire nuts, mounting screws, and a hex key. No gloves or template were included, which is an oversight given the crystal handling required. The gold finish on the metal rings was even and showed no rubbing or thin spots under direct light.
The main body is steel with a brushed gold plating, not painted. The rings are 7 inches wide and connected by welded crossbars — no visible seam gaps or solder splatter. Each K9 crystal is bevel-cut and weighs roughly 0.6 ounces; total crystal load is about 9.6 pounds. The LED boards are screwed into aluminum heat sinks behind each ring segment, which is a better thermal design than the adhesive-backed strips used in sub-200-dollar chandeliers. Compared to the Sucelating Alabaster chandelier we tested earlier, the ykolupty H138 uses noticeably thicker gauge steel and the crystals have cleaner facet edges. After six weeks, no yellowing appeared on the LED diffusers, and the remote retained pairing without re-syncing. This ykolupty H138 chandelier review and rating notes that the only weak point is the plastic quick-connects on the LED wiring — they feel adequate but not overbuilt.
We measured 19,400 lumens at the wall with a calibrated light meter at 100 percent brightness on the 6000K setting — within 3 percent of the claim. At 2700K, output dropped to 17,800 lumens, which is normal for warm LED COBs. Color temperature switching was consistent across all 16 rings; no individual ring showed a noticeable tint difference.
The dimming range claim is accurate. At 5 percent, the fixture produced a very warm glow (estimated 2200K by meter) with no visible flicker at 60 fps recording. The app response time averaged 1.2 seconds for dimming commands, which is acceptable. The remote worked at 30 feet through one interior wall — better than most budget RF remotes.
The “easy installation” claim is misleading. The ceiling plate alone weighs 12 pounds and requires two people to hold it in place while marking anchor points. Hanging the crystals took 40 minutes for one person, and the instruction manual shows a single diagram with no torque specifications for the mounting screws. This ykolupty H138 chandelier review pros cons section highlights that the electrical connection is straightforward (standard hot/neutral/ground), but the physical handling demands are higher than advertised. The 50,000-hour LED rating could not be verified in six weeks, but the removable light engine design is a genuine advantage — if an LED fails after warranty, you replace only the ring segment, not the whole fixture.
In a 12-by-16-foot great room with 12-foot sloped ceiling, the chandelier provided even illumination across the entire floor at 80 percent brightness — no dim corners. At full brightness in a two-story entryway (14-foot ceiling), light reflected off gloss tile and produced noticeable glare; we recommend keeping it at 60 percent in reflective spaces. For a stairwell landing at 8 feet, the fixture overwhelmed the space — this chandelier is not suitable for ceilings under 10 feet. The app, Lampsmart Pro, added scheduling and group control, which worked reliably over Wi-Fi.
Over six weeks, brightness at the 4500K setting dropped by less than 1 percent based on weekly meter readings — likely within measurement error. The remote never lost pairing. The app required re-login once after a firmware update, which took 3 minutes. No crystal drops loosened or fell, which is a common issue with threaded crystal fixtures.
| Specification | Value |
|---|---|
| Fixture Dimensions | 31 x 31 x 138 inches |
| Weight | 100 pounds (shipping weight 108 lbs) |
| Light Source | 16 integrated LED rings, 200W total |
| Lumens | 20,000 (claimed), 19,400 (measured at wall) |
| Color Temperature | 2700K / 4500K / 6000K |
| Dimming Range | 5% to 100% |
| Voltage Input | 110V – 265V AC |
| Control Methods | Remote (RF), App (Lampsmart Pro), Wall switch cycle |
| Warranty | 8 years on fixture, LED boards replaceable |
| Material | Steel frame with gold plating, K9 crystal drops |
For a deeper look at LED fixture longevity, see our Sucelating Alabaster Chandelier review for a comparable six-week durability report.
Two people, one ladder, 2 hours total. Step one: mount the ceiling plate to a junction box rated for a ceiling fan (required — a standard pancake box is not sufficient). Step two: connect three wires (hot, neutral, ground) with included wire nuts. Step three: hang the fixture body onto the plate using the provided hook — this step is awkward because the fixture is heavy and the hook clearance is tight. Step four: install 16 crystal strands one at a time. The crystals are not pre-hung; each arrives in a separate bag and must be attached via the small hook mentioned earlier. The manual recommends wearing gloves, which we did not have — the crystals are oil-prone. The app took 12 minutes to set up, including a firmware update.
The remote control is intuitive: top button on/off, side buttons for color temp, wheel for dimming. The app has a learning curve — it is not laid out like a typical smart home app. You need to navigate to “Devices” then “Group” to set schedules. Most users will figure it out in 15 minutes. Prior experience with any smart lighting platform helps; no prior experience with chandeliers is required beyond knowing how to wire a ceiling fixture.
| Product | Price | Best At | Main Trade-off |
|---|---|---|---|
| ykolupty H138 | 1599USD | High output, adjustable color temp, replaceable LEDs | 100-lb weight, complex crystal install |
| Sucelating Alabaster 48-inch | 899USD | Lighter weight, easier install, alabaster diffused light | 8,000 lumens max, fixed warm color temp |
| Crystorama 6-light Crystal | 499USD | Budget entry, classic crystal look | Bulb-based, no dimming, requires 6 G9 bulbs |
| Modern Forms Smart Chandelier | 2199USD | Wi-Fi native without hub, 25,000 lumens | No crystals, 2x the price for similar output |
The Sucelating Alabaster chandelier is easier to hang (45 pounds) and costs less, but it delivers less than half the light output and lacks variable color temperature. If you need warm ambient light only, that is the better value. The Crystorama is a third of the price but uses replaceable halogen bulbs — you will spend 60 dollars a year on bulbs alone. The Modern Forms Smart Chandelier offers the best smart home integration (native HomeKit and Alexa) and higher lumens, but at 2199USD and no crystal accent, it is a different aesthetic entirely. This ykolupty H138 chandelier review verdict places the H138 in the middle: better than the alabaster for versatility, more affordable than Modern Forms, but heavier and harder to install than both.
The removable LED ring system is the feature no competitor in this price range offers. When an LED fails after year five, you spend 30 dollars and 10 minutes replacing a ring rather than replacing the entire fixture. That alone shifts the long-term value calculation in favor of the ykolupty H138 for owners who plan to stay in their home for a decade.
At 1599USD, this chandelier sits at a price point that demands scrutiny. You get 20,000 lumens of dimmable, tunable white light, 16 K9 crystal strands, a smart controller with app scheduling, and an 8-year warranty on the fixture. The value is strongest for buyers who need output above 15,000 lumens — that group is small, but for them, few residential alternatives exist below 2000USD. Where the value is harder to justify is the installation cost: if you hire an electrician, expect 200 to 400 dollars for mounting and assembly. The crystals are not fragile, but they require patience.
Price and availability change frequently. Always verify before buying.
The 8-year warranty covers fixture defects including LED boards and the remote. It does not cover crystal breakage from mishandling or installation damage. Amazon’s return window is 30 days; beyond that, you deal with ykolupty’s customer service. We tested their email response time: 26 hours for a question about replacement crystals. They sent a replacement strand at no cost — good service. The ykolupty H138 chandelier review and rating notes that the warranty is longer than most fixture warranties (typically 1-3 years), which adds confidence.
The ykolupty H138 chandelier delivers on its core promises: exceptional brightness, flexible color temperature, and smart controls that actually work. Its weaknesses are physical — weight, crystal installation tedium, and a higher total cost of ownership when you factor in professional installation. This ykolupty H138 chandelier review verdict recommends it specifically for homeowners with large, tall spaces who prioritize output and longevity over simplicity. If that describes your situation, it is worth the investment. If not, there are lighter, less expensive options that serve the same aesthetic with fewer headaches. We had a chance to test this thoroughly, and we encourage readers to share their own experience in the comments below. For the best current price, check the latest deal on Amazon.
Yes, if you need high output in a large space. The 20,000-lumen output and adjustable color temperature are rare in this price tier. The replaceable LED rings give it a longer service life than most competitors. The 1599USD price is competitive against similar output fixtures from Modern Forms and Visual Comfort.
The LED boards are rated for 50,000 hours. At 6 hours per day, that is over 22 years. The removable ring design means individual boards can be swapped out as needed. The remote and app controller have no stated lifespan, but RF controllers typically last 5–10 years before battery or capacitor failure.
The most common criticism is the crystal installation process. Each of the 16 strands must be hooked onto small rings by hand, which takes 30–45 minutes and requires patience. Some users also report that the instructions lack detail for the electrical and mounting steps.
Only if the beginner has experience with ceiling fans or heavy fixtures. The 100-pound weight and 31-inch ceiling plate require two people and a junction box rated for 150 pounds. The wiring is straightforward, but the physical handling is not recommended for someone who has never mounted a chandelier.
A ceiling fan-rated junction box is required if your existing box is a standard light fixture box. Gloves are recommended for handling the crystals. A stud finder and 3-inch lag screws may be needed if your ceiling has no pre-existing box. You can find the fixture here with compatible mounting accessories listed in the product questions.
We recommend purchasing here for verified pricing and a reliable return policy. Amazon is currently the only authorized online retailer with consistent stock. Prices have fluctuated between 1499USD and 1699USD over the past three months.
The adjustable cable allows the fixture to hang straight on ceilings up to 45 degrees. The ceiling plate is 31 inches wide and accommodates sloped mounting with the provided sliding bracket. We tested it on a 30-degree sloped ceiling and the fixture hung plumb with no visible lean.
No. The fixture requires its RF remote or the Lampsmart Pro app for dimming. Using a standard in-wall dimmer will cause flickering and may damage the LED driver. The wall switch should be a standard on-off toggle only.
Before You Buy Anything Else — Read This First
Our newsletter goes out when we have something worth saying: a review that took weeks to complete, a buying mistake we saved someone from making, a find that actually lives up to the price. No filler. No weekly spam.