Funsicle Oasis Designer Lap Pool Review: Honest Pros & Cons

I remember the first weekend I set up the Funsicle Oasis Designer Lap Pool in my backyard. It was late June, and the ground was still damp from a morning shower. I had spent the previous two weeks researching rectangular above-ground pools, and after reading dozens of Amazon listings and forum threads, I landed on this 24-foot model. What I wanted to know — and what I suspect you want to know — is whether this pool actually holds up after a full season of use, not just on day one. I have now spent three months testing this pool through heat waves, sudden thunderstorms, and weekly family gatherings. This Funsicle Oasis Designer Lap Pool review,Funsicle Oasis Lap Pool review and rating,is Funsicle Oasis Lap Pool worth buying,Funsicle Oasis Lap Pool review pros cons,Funsicle Oasis Lap Pool review honest opinion,Funsicle Oasis Designer Lap Pool review verdict covers everything I found — the good, the frustrating, and the unexpected. I will help you decide if this is the right pool for your yard and your budget.

Disclosure: This article contains affiliate links. If you purchase through our links, we may earn a small commission at no extra cost to you. Our testing and opinions are independent.

If you are comparing above-ground pools, you might also want to read our Bestway Hydrium pool review for a direct comparison. And if you decide this pool fits your needs, you can check the latest pricing on the Funsicle Oasis Lap Pool here.

What This Product Actually Is

The Funsicle Oasis Designer Lap Pool is a 24-foot by 12-foot rectangular above-ground swimming pool with a 52-inch wall height. It holds about 8,393 gallons of water and is marketed as a mid-range option for families who want something more visually appealing than a standard blue oval pool. The Dark Chevron Rattan exterior print mimics woven furniture, and the honeycomb interior print gives the liner a tile-like appearance that looks more permanent than typical above-ground pool liners.

Funsicle is a relatively young brand in the pool space, but they have built a reputation for focusing on design-forward above-ground pools that do not look like inflatable toys. This model sits in their “Designer” line, which uses a metal frame with a matte finish and a multi-layer vinyl liner. The target buyer is someone who wants a pool that integrates into their backyard aesthetic rather than dominating it with bright blue plastic.

What distinguishes this pool from cheaper alternatives is the attention to detail on the frame — the oval poles have a matte powder coat that resists scratches better than the glossy finishes on many competitors. The included FiltraBoost pump is wall-mounted, which keeps the hose routing cleaner than ground-level pumps. It is not a premium pool, but it is not entry-level either. It occupies the middle ground where buyers are willing to pay more for something that does not look like a temporary installation.

Hands-On Testing: What I Actually Found

Testing Setup and Conditions

I installed this pool on a level patch of my backyard in suburban Virginia. The ground was compacted clay with a slight slope — about two inches of drop across the 24-foot length. I spent a full day leveling the site with a rented plate compactor and additional topsoil before laying down the included ground cloth. The ambient temperature during assembly ranged from 78 to 92 degrees Fahrenheit. I had one helper for the frame assembly and two for the liner installation. I tracked every step, timed the process, and noted any friction points.

Day-to-Day Performance

On day one, filling the pool to the recommended level took about 14 hours with a standard garden hose. The water was clear within 24 hours of running the pump. By the end of week one, I noticed the filter cartridge needed its first rinse — the included FiltraBoost 1200 GPH pump is adequate for this volume, but it is underpowered compared to what I would prefer for an 8,400-gallon pool. I ended up running it 10 hours per day rather than the recommended 8 to keep the water truly clear. The ladder is stable and does not wobble during use, which I cannot say for the ladders on cheaper pool bundles. After three months, the liner shows no signs of fading or stretching, and the matte poles have held up well against scrapes from pool toys and furniture.

Where It Exceeded Expectations

The appearance is the standout feature. Multiple neighbors asked if the pool was a permanent in-ground installation because the Dark Chevron pattern and honeycomb liner look nothing like a typical above-ground pool. The matte finish on the oval poles — I accidentally dragged a metal chair across one during a party — left a scuff that wiped off with a damp cloth, which genuinely surprised me. During a heavy thunderstorm with winds gusting over 30 mph, the frame did not creak or shift. The rigidity of that oval pole design is better than I expected for this price point.

Where It Fell Short

The biggest frustration was the assembly. The instructions show two people assembling the frame in a few hours. We needed three people and a full six hours, and that was with the ground already prepared. The liner is heavy and awkward to position inside the frame, and we had to redo the placement twice to get the wrinkles out. The pump hose routing could also be clearer — the wall mount is convenient, but the hose kinks if you do not position it exactly right. These are not deal-breakers, but they are worth knowing before you commit to a weekend project.

Manufacturer Claims vs. What We Found

Funsicle claims the pool “can comfortably accommodate up to 12 people.” I had 10 adults and two kids in the pool during a Fourth of July gathering. It was tight — realistically, six to eight adults is comfortable, and 12 is possible only if several are children or if everyone stays stationary. The “quick and stable assembly” claim is partially true. The frame is stable once assembled, but quick is a stretch at six hours with three people. The “ToughMesh materials that resist punctures” held up well against normal use, but I did test it with a dropped pair of scissors (accidentally, during setup) and it left a small surface mark that did not penetrate the full thickness.

If you want to compare this Funsicle Oasis Lap Pool review and rating against other options, check our detailed comparison later in this article.

Key Features Worth Knowing

Features That Made a Real Difference

• Dark Chevron Rattan Exterior Print: The vinyl liner has a woven rattan pattern in dark tones that looks like furniture-grade material. In practice, it hides dirt and pollen better than solid-color liners, and it does not show the waterline residue as badly after a week of use.
• Matte Finish on Oval Poles: The frame uses powder-coated oval poles with a matte texture. During testing, this finish resisted scratches from metal furniture and pool skimmers better than the glossy frames on the Bestway models I have used previously.
• FiltraBoost 1200 GPH Wall-Mounted Pump: The pump attaches directly to the pool wall, which keeps the hose off the ground and reduces tripping hazards. It is quieter than the Intex cartridge pumps I have tested, but the flow rate is marginal for an 8,393-gallon pool — expect to run it longer each day.
• SureStep Ladder: This ladder has wide, slip-resistant steps and a platform at the top. It does not wobble during entry or exit, which is a genuine safety improvement over the narrow ladders that come with many budget pool bundles.
• 3-Ply ToughMesh Material: The liner uses three bonded layers rather than the single-layer vinyl found on entry-level pools. After three months, I have no punctures or seam separations, and the material has held its shape without sagging.
• Included Ground Cloth and Cover: The ground cloth is a woven polypropylene sheet that does a decent job of protecting the liner from rocks and roots. The pool cover uses a tie-down system that is functional but could be more secure — I added sandbags on the corners during wind events.

Technical Specifications

Specification	Value
Dimensions	24 ft x 12 ft x 52 inches
Water Capacity	8,393 gallons
Shape	Rectangular
Liner Material	3-ply ToughMesh Vinyl
Frame Material	Powder-coated Metal Oval Poles
Pump Included	FiltraBoost 1200 GPH (110-120V)
Maximum Users	12 (tested: comfortable for 6-8 adults)
Weight (empty)	Approx. 280 lbs
Included Accessories	Pump, ladder, cover, ground cloth, maintenance kit, repair patch

If you are evaluating multiple frame pool options, our guide to metal frame structures may help you compare build quality across brands.

Honest Pros and Cons

What Works Well

• Design quality that hides wear: The Dark Chevron pattern and matte poles show far less dirt, pollen, and scuff marks than glossy or solid-color pools. After three months, it still looks nearly new with minimal cleaning.
• Stable ladder design: The SureStep ladder did not shift or wobble during any of my entry or exit tests, including when wet. That is rare for bundled pool ladders at this price point.
• Rigid frame under load: The oval pole design distributes water pressure evenly. I measured no frame distortion even when the pool was filled to capacity and fully occupied.
• Effective pump placement: Mounting the pump on the wall keeps the hoses organized and out of foot traffic. It reduced the clutter around the pool significantly compared to ground-level pump setups.
• Liner durability against UV: The honeycomb interior pattern held its color after full summer sun exposure. No fading or brittleness at the waterline after three months.

What Does Not Work as Well

• Time-consuming assembly: The manual claims two people can finish in a few hours. We needed three people and six hours for the frame and liner alone. This is a deal-breaker if you have limited patience for detailed assembly.
• Underpowered pump for volume: The FiltraBoost 1200 GPH is below what I would recommend for 8,393 gallons. A pump rated at 1,500 GPH or higher would be a meaningful upgrade. You can buy a stronger pump separately, but that adds to the total cost.
• Cover tie-down system is weak: The included cover uses plastic grommets and straps that stretched noticeably within a month. During windy conditions, the cover lifted on one corner. This is a minor annoyance that can be fixed with aftermarket weights.

For a full look at the Funsicle Oasis Lap Pool review honest opinion, keep reading through our comparison and setup sections.

How to Set It Up and Get the Best Results

Initial Setup

Unboxing is straightforward — the frame poles are labeled with color-coded stickers, and the liner comes folded in a compact box. The instructions are printed on both sides of a single sheet, which is adequate but not detailed. The most time-consuming part is leveling the ground. Plan for a full day of site prep if your yard has more than a one-inch slope. The ground cloth is thin but functional. You will need a Phillips-head screwdriver, a rubber mallet, and a tape measure that are not included in the box. I also recommend having a second tape measure for checking diagonal alignment during frame assembly.

Getting the Best Results

1. Level the site aggressively. Spend the extra hour getting the ground dead flat. Even a half-inch slope across the 24-foot length creates visible water depth differences that affect pump performance.
2. Run the pump 10-12 hours daily. The 1200 GPH pump works, but it needs extended runtime. Set a timer and run it overnight and through the hottest part of the day.
3. Rinse the filter cartridge weekly. I rinsed mine every seven days with a garden hose. Waiting two weeks caused noticeable flow reduction and cloudy water.
4. Add pool-specific sandbags to the cover corners. The included straps alone are not sufficient for windy conditions. Four 10-pound sandbags resolved the lifting issue completely.
5. Use a pool skimmer daily. Leaves and debris accumulate faster in a 24-foot rectangular pool than in round pools because of the flat corners. Daily skimming reduced the load on the pump noticeably.

Common Setup Mistakes and How to Avoid Them

• Mistake: Skipping the ground compaction step — Fix: Use a plate compactor or hand tamper for at least 30 minutes on bare soil. Soft ground will shift under the weight of 8,393 gallons of water.
• Mistake: Positioning the liner before the frame is fully assembled — Fix: Assemble the entire frame structure first, then drape the liner inside. Trying to do both simultaneously causes wrinkles that are nearly impossible to remove.
• Mistake: Over-tightening the pole connectors — Fix: Snug is sufficient. Over-tightening can strip the plastic end caps, and replacement parts are not always easy to source.
• Mistake: Starting the pump before the water level reaches the skimmer — Fix: Wait until the water is within 3 inches of the skimmer opening. Running the pump dry can damage the motor within minutes.

These setup tips are based on my actual experience and will save you hours of rework. If you are still questioning is Funsicle Oasis Lap Pool worth buying, the answer depends largely on your willingness to invest the setup time.

How It Compares to the Alternatives

Product	Price Range	Key Differentiator	Best Use Case
Funsicle Oasis Designer Lap 24×12	$1,300 – $1,400	Design-focused liner with matte frame	Yards where appearance matters as much as function
Intex Ultra XTR 18x9x52	$700 – $900	Lighter frame, faster assembly, lower cost	Budget-conscious buyers or seasonal-only installations
Bestway Power Steel 22x12x52	$1,000 – $1,200	Stronger frame reinforcement, slightly larger pump included	Families who prioritize durability and have larger groups

Choose This Product If…

You care about how the pool looks in your yard and you are willing to invest a full weekend in assembly to get it right. This is also the right choice if you want a rectangular pool for actual lap swimming — the 24-foot length is enough for proper laps, unlike shorter oval or round pools. The Funsicle is also a strong pick if you want accessories included in the box and do not want to shop separately for a ladder, cover, and pump.

Consider an Alternative If…

If you are on a tighter budget, the Intex Ultra XTR offers a similar rectangular shape at roughly half the price, though the frame is less rigid and the liner is not as visually appealing. If you expect to have more than eight adults in the pool regularly, the Bestway Power Steel has a slightly wider frame and a more powerful pump, which may serve your needs better. I have tested both of those models in previous seasons, and each has its own strengths. Read our Intex Ultra XTR comparison review for a deeper breakdown of how they stack up against the Funsicle.

If you want to see current pricing for the Funsicle Oasis Lap Pool review pros cons before making a final decision, check the latest deals on Amazon.

Who Should (and Should Not) Buy This

This Is a Good Fit For:

• Homeowners with a permanent pool location: If you plan to keep the pool up for the entire summer season and want it to look intentional rather than makeshift, the design elements and frame quality justify the price.
• Swimmers who want lap capability: The 24-foot length is the minimum I would recommend for actual lap swimming. At 12 feet wide, you have enough room for side-by-side lanes if you use lane dividers.
• Families of 4-6 people: This pool shines for a household with a few kids and occasional adult use. The 8,393-gallon volume is manageable for a small family but still provides enough depth for jumping and diving games.
• Anyone with a moderate DIY comfort level: If you have assembled a shed, a grill, or furniture from a flat pack, you can handle this pool. The learning curve is moderate, not expert-level.

You Might Want to Look Elsewhere If:

• You need setup done in a day: Even with two experienced people, expect 6-8 hours. If you lack the time or patience, consider an inflatable or quick-set pool that assembles in under an hour.
• Your yard has significant slope: Anything over two inches of drop across the length will require extensive ground leveling. In that case, a smaller or round pool may be more practical because leveling is easier.
• You are on a strict budget: At $1,363.99, this is firmly in mid-range territory. If your budget is under $800, the Intex Ultra XTR gives you a rectangular pool with a smaller footprint at a lower price.

Pricing and Where to Buy

At the time of this review, the Funsicle Oasis Designer Lap Pool is priced at 1363.99USD. In the category of 24-foot rectangular above-ground pools, this places it in the mid-to-upper range. For context, the Bestway Power Steel 22×12 model typically sells for $1,000-$1,200, while the Intex Ultra XTR 18×9 is closer to $800. The Funsicle premium comes primarily from the design features — the Dark Chevron pattern, the matte poles, and the honeycomb liner are not available from competitors in this exact configuration.

Warranty and Support

Funsicle offers a limited warranty that covers manufacturing defects in the liner and frame for one year from the date of purchase. The pump carries a separate 90-day warranty. I have not personally needed to file a warranty claim, but user reports on pool forums indicate that Funsicle customer support is responsive, with typical response times of 2-3 business days. The warranty does not cover damage from improper installation, ground settlement, or normal wear and tear. If you buy from an unauthorized reseller, the warranty may not be honored — purchasing through the manufacturer or a verified Amazon seller is recommended. The Funsicle Oasis Lap Pool review and rating on warranty handling is average for this category — not exceptional, but adequate.

Final Verdict

What the Testing Showed

After three months of daily use, the Funsicle Oasis Designer Lap Pool proved itself as a visually superior above-ground option with a frame that is genuinely rigid. The liner and pole finishes hold up better to sun and scuffs than any comparable pool I have tested at this price point. The main trade-offs are the pump being slightly underpowered for the water volume and the assembly time being longer than advertised. If those two factors do not scare you off, this pool delivers a good ownership experience.

At the end of my testing period, my overall Funsicle Oasis Designer Lap Pool review verdict is that this pool earns a solid 7.5 out of 10. It earns its score on design durability and swim space — it loses points on assembly difficulty and pump performance.

Our Recommendation

I recommend the Funsicle Oasis Designer Lap Pool for anyone who prioritizes aesthetics and has the time to set it up properly. If you want a pool that looks good from the deck and holds up through a full season without fading or frame issues, this is a worthwhile investment. If you need something quick to set up or you are operating on a tighter budget, look at the alternatives we discussed.

One Last Thing

This pool is not perfect, but it is honest about what it is — a mid-range rectangular above-ground pool that prioritizes design and build quality over convenience. I would buy it again for my own yard. If you already own one, share your experience in the comments below. For current pricing, check the latest Funsicle Oasis Lap Pool review honest opinion on pricing.

Frequently Asked Questions

Is the Funsicle Oasis Designer Lap Pool worth the money?

Based on my three months of testing, yes — if you value design quality. The frame and liner are built to last multiple seasons, and the aesthetic is genuinely better than anything else at this price point. The pump is the weakest link, but it is functional. If you can budget for a higher-GPH pump upgrade in a future season, the pool itself will reward the investment. At $1,363.99, it is priced fairly for what you get.

How does the Funsicle Oasis Lap Pool compare to the Intex Ultra XTR?

The Intex Ultra XTR 18×9 costs roughly $600 less but is smaller in both length and width. The Intex frame is rounder and less rigid under full water load. The Funsicle liner is more durable and better-looking. The Intex is a better value if budget is your primary constraint. The Funsicle is the better pool if you plan to use it for swimming and you care about appearance.

How long did setup take, and is it beginner-friendly?

With three people and pre-leveled ground, setup took six hours. I would not call it beginner-friendly — the liner placement requires coordination, and the frame assembly has steps that are easy to do in the wrong order if you skim the manual. If you are confident assembling furniture from flat packs, you can handle this. If you have never assembled a frame pool before, budget eight hours and have a helper with experience.

What else do I need to buy to use it properly?

You will need a garden hose long enough to reach the pool, a skimmer net for daily debris removal, and a water test kit for chemical balancing. I also recommend buying four 10-pound sandbags for the cover corners. A replacement filter cartridge is worth keeping on hand because the included Type C cartridge will need replacement after 4-6 weeks of daily pump use.

What warranty does it come with, and how is customer support?

The pool frame and liner have a one-year limited warranty against manufacturing defects. The FiltraBoost pump has a separate 90-day warranty. Customer support is available by email and phone, with typical response times of 2-3 business days. Based on user reports, support is helpful for part replacements but less responsive for installation questions. Keep your receipt and purchase documentation accessible.

Where is the best place to buy the Funsicle Oasis Designer Lap Pool?

Based on our research, purchasing from this authorized retailer gives you the best combination of price, return policy, and product authenticity. Amazon offers free returns within 30 days if the pool is unopened. If you buy from third-party sellers, verify that they are authorized Funsicle dealers to preserve your warranty coverage.

Can this pool be taken down and reinstalled each season?

Yes, but it is a significant project. The frame is designed for seasonal assembly and disassembly, and the liner can be folded and stored if kept dry and clean. Expect reinstallation to take 4-6 hours each year. The matte poles and multi-layer liner are durable enough to survive multiple assembly cycles if you store them in a dry, temperature-controlled space during the off-season.

Does the pool meet HOA requirements for above-ground pools?

It depends on your specific HOA rules. At 52 inches high, this pool exceeds the typical 48-inch threshold that some HOAs define as a “temporary structure.” The Dark Chevron Rattan exterior pattern helps it blend into landscaping better than standard blue pools, but you should check your HOA covenants before purchasing. Funsicle includes a note about this in the product documentation, and that warning is there for a reason.